logo
Invia messaggio
Shenzhen Jianheng Technology Co., Ltd. 0086-137-25559416 alan@liion-batt.com
High-Capacity 6850mAh 7.2V Lithium Ion Battery Pack for Smart Locks with Lightweight Design

High-Capacity 6850mAh 7.2V Lithium Ion Battery Pack for Smart Locks with Lightweight Design

  • Evidenziare

    High-Capacity 6850mAh Lithium Ion Battery

    ,

    7.2V Voltage Smart Lock Battery

    ,

    Lightweight Rechargeable Battery Pack

  • NOME
    Pacco batteria agli ioni di litio 735589-6850mAh per serrature intelligenti
  • ODM
    Design personalizzato gratuito per pacchetti
  • Capacità
    6850 mAh
  • catodo
    Ossido di litio nichel manganese cobalto (Li-NMC)
  • Tipo
    Custodia ricaricabile per cella agli ioni di litio
  • voltaggio
    7.2v
  • Tassa
    1C max
  • Scarico
    2,5°C massimo
  • Temperatura operativa
    Ricarica: da 0°C a 45°C; Scarica: da -20°C a 60°C
  • Vita ciclo
    Oltre 500 cicli con capacità ≥80%.
  • Peso
    ≤210g
  • Resistenza interna
    ≤140 mΩ (CA 1000 Hz)
  • Dimensioni
    17,3*59,8*101,5
  • Luogo di origine
    Cina
  • Marca
    OiD
  • Certificazione
    Compliant with UL1642, IEC/EN6196, and GB/T 18287-2013 standards
  • Numero di modello
    735589-6850mAh
  • Quantità di ordine minimo
    Negoziabile
  • Prezzo
    negotiable
  • Imballaggi particolari
    Cartone
  • Tempi di consegna
    3 ~ 30 giorni
  • Termini di pagamento
    L/C, T/T, Western Union
  • Capacità di alimentazione
    100000

High-Capacity 6850mAh 7.2V Lithium Ion Battery Pack for Smart Locks with Lightweight Design

Product Name: 735589-6850mAh Li-ion Battery Pack for Smart Locks

Key Features:

  • Extended Usage Time: With a large 6735mAh capacity, this battery significantly reduces how often you need to recharge your smart lock.
  • Stable Voltage Output: Maintains consistent performance for all electronic components within the smart lock system.
  • Built-in Protection Circuitry: Ensures safe operation by guarding against over-charge, over-discharge, short circuit, and other potential issues.

Technical Specifications Table:

Parameter Specification Details / Conditions
Model Number 735589-6850mAh
Configuration 2S1P Two cells in series, one in parallel.
Nominal Voltage 7.2V
Rated Capacity (Cmin) 6735mAh Measured at 0.2C discharge rate down to 6.0V at room temperature (25°C ±2°C).
Typical Capacity ~6850mAh
Energy 49.32Wh Calculated from nominal voltage and rated capacity.</tr></table>

Detailed Electrical Parameters:

Parameter Value Unit Conditions / Notes
Charge


Standard Charge Current 0.2C (~1347mA) CCCV method, cut-off at 0.02C.
Max. Continuous Charge Current 1C A
Max. Charge Current (>45°C) 0.5C A
Charge Cut-off Voltage 8.5V Per pack.
Charge Temperature Range 0°C to 45°C

Discharge


   Standard Discharge Current 0.2C mA
Max. Continuous Discharge Current 2.5C A
Peak Discharge Current (pulse) >3.5A For very short durations, like motor startup.
Discharge End Voltage 6.0V Recommended termination point.
Discharge Cut-off Voltage 5.5V Minimum safe load voltage for the pack.>Note: The protection circuit will activate if the voltage drops below this level during operation.
Discharge Temperature Range -20°C to 60°C

Additional Key Parameters:

  • Internal Resistance: ≤140mΩ (initial, AC method at 25°C±2°C). 
  • Weight : Approximately 210g
  • Dimensions (L x W x H) : 17.3mm x 59.8mm x 101.5mm
  • Cycle Life:  ≥500 cycles, To 80% initial capacity retention.
  • Self-Discharge Rate: <3% per month, At room temperature (20°C ±5°C), recoverable after charging

Operating & Storage Environment:

Condition Temperature Range Relative Humidity
Operation -20°C to 60°C ≤95% RH
Storage -10°C to 45°C Short-term storage recommendation.
Recommended StorageRecommended Storage State 50%-70% State of Charge (SoC) For non-air transport.
Storage (for air transport) SOC ≤30% As per IATA regulations.

Important Notes for Optimal Performance & Safety:

  • Use only with the specified smart lock charging circuit.
  • Do not exceed the maximum charge and discharge currents specified.
  • Avoid exposing the battery to temperatures outside its specified range.
  • If the battery surface temperature exceeds 60°C during use, allow it to cool completely before attempting another charge or discharge cycle.
  • Adhere to all specified charge and dischage parameters to maximize lifespan and safety.

Certifications & Compliance: The battery pack is designed and tested to meet relevant international standards for safety and performance. Specific certifications may apply depending on the final configuration and customer requirements.

Integration & Compatibility:

This battery is engineered as a direct power source replacement for compatible smart lock models. Ensure compatibility with your device's voltage and connector specifications before purchase.

For detailed integration guides or technical support, please consult the product documentation or contact authorized service providers.